TARGET 3001! Adjustments and modifications (Logfile)

2008-05-04: 13.5.0.49: Elements can be concatenated as moduls: Context menu, menü "Edit" and search
2008-05-04: 13.5.0.49: The "vertical line" character "|" in a pin name starts and ends an overline for inverted pins
2008-05-02: 13.5.0.49: After copy/paste of PCB parts sometimes pads were cut off in isolation milling
2008-04-29: 13.5.0.49: TARGET 3001! viewer is available
2008-04-28: 13.5.0.49: TIFF output: Added information on resolution again and reduced file size of B/W TIFFs
2008-04-27: 13.5.0.49: Scale dialog: Inserted [100%] button
2008-04-25: 13.5.0.49: 2008: Check function can give warnings if a component in the project is older than in the respective library
2008-04-24: 13.5.0.49: Dual screen systems: Hints are displayed on the correct screen
2008-04-23: 13.5.0.49: Components in library: Symbols can be automatically reloaded from other equvalent components
2008-04-15: 13.5.0.8: Selection assistant always preselects "Element type" as first property
2008-04-14: 13.5.0.8: Alignment assistant also copies the 3D model from the library
2008-04-14: 13.5.0.8: TIFF output of big pictures with high resolution caused problems
2008-04-14: 13.5.0.8: When toggeling a layer visible using the layer toolbar, often static crosshairs remained on the screen
2008-04-11: 13.5.0.8: Mounting drills of packages may be assigned to a signal (e.g. GND) without a schematic representation of that fact
2008-04-08: 13.4.0.82: Pressing [Shift] while dragging a sharp bend, enforces it to be a 45° bend
2008-04-07: 13.4.0.82: Texts can be visible or invisible depending on the selected variant
2008-04-07: 13.4.0.82: Display of the PCB surface area in the info dialog in menü "help"
2008-04-07: 13.4.0.82: When reloading component properties from the library, the existing properties are not deleted first
2008-04-03: 13.4.0.82: STEP 3D Export implemented.
2008-04-02: 13.4.0.82: Corrected auras of pads from before V12.2.0.28 (2005-11-23), if the copper was smaller than the drill hole
2008-04-01: 13.4.0.82: Bill of material: Several variants can now be exported in different files in one go
2008-03-31: 13.4.0.82: Extended the list of last recently used projects to 30
2008-03-31: 13.4.0.82: Saving a project sometimes forgot to remember which layers were just toggled visible or not
2008-03-28: 13.4.0.82: Pictograms of the drilling plan: Pictograms are saved with the project data
2008-03-28: 13.4.0.82: Pictograms of the drilling plan: The legend of drill symbols keeps position, size and layer
2008-03-26: 13.4.0.82: Pictograms of the drilling plan: The legend of drill symbols is added on the right side beside the PCB
2008-03-20: 13.4.0.56: Component import: The future font weight in percent can also be defined
2008-03-20: 13.4.0.56: PostSript: Drill holes of pads without copper (Height=0, Width=0) were not always displayed
2008-03-18: 13.4.0.56: Box for variants on the right top gets longer if one clickes on it (for long variant names)
2008-03-18: 13.4.0.56: Settings (Project): The font DinIsoAnsi was missing in the lists
2008-03-13: 13.4.0.56: Variant components could not be reset to invariant any more and were always displayed dotted
2008-03-13: 13.4.0.56: Color dialog now with hex input field
2008-03-13: 13.4.0.56: Color dialog sometimes received the wrong color
2008-03-11: 13.4.0.51: TIFF output with compression now
2008-03-06: 13.4.0.51: PostScript output: Sometimes padstacks were displayed erroneously in the schematic pages
2008-02-28: 13.4.0.41: Schematic: Component names and values can be switched invisible in menu "View"
2008-02-19: 13.4.0.36: Teardrops can now also be applied on all selected pads and vias at once
2008-02-17: 13.4.0.21: Import packages: Fonts for component names and values can be determined for the future
2008-02-17: 13.4.0.21: Import symbols: Fonts for component names and values and pin names can be determined for the future
2008-02-12: 13.4.0.14: Successive import of several components: The selected rotation and mirroring is remembered
2008-02-12: 13.4.0.14: Displacement of components: [m] for mirroring during displacement is possible
2008-02-11: 13.4.0.14: Possibility to make own components available to IBF when exporting components and in the library browser
2008-02-05: 13.3.0.166: The error message "ERROR_INVALID_AT_INTERRUPT_TIME" appeared, if the date was put forward many years
2008-02-04: 13.3.0.166: Export of self drawn components: Those can be transmitted to IBF so that all users can benefit from
2008-01-29: 13.3.0.166: Use capture window with M1 "backwards" from right to left: Touching an element is enough for selecting
2008-01-29: 13.3.0.166: Library browser: Some electrolytic capacitors were not shown in the tree view
2008-01-29: 13.3.0.166: Rename signal: If the new name is already existant, the two signals can be connected on request
2008-01-18: 13.3.0.166: 3D view: Repaired problems with TrueType fonts
2008-01-04: 13.3.0.164: Component preview in component browser: Drillholes are now displayed too
2007-12-30: 13.3.0.164: Druck-Dialog: Centering holes always have min. 0.25 mm copper around to set the drill bit
2007-12-30: 13.3.0.164: Print dialog: Printing of background color disengageable
2007-12-18: 13.3.0.148: The aura (min. spacing) when moving vias and pads is now also shown dashed, as it is displayed for moved tracks
2007-12-18: 13.3.0.148: Using the keys [+] or [*] during the creation of elements, coordinates can easily be entered manually too
2007-12-17: 13.3.0.148: Auto-Pan during the wiring of signal traces and copper tracks available
2007-12-17: 13.3.0.148: Library browser: Tab "Library": Component selection: Enter initial chars to approach a component
2007-12-06: 13.3.0.142: Improved import of Eagle libraries
2007-11-29: 13.3.0.140: Isolation milling: Z-Height for moving adjustable
2007-11-29: 13.3.0.140: Component names are always saved without leading or trailing space characters (blanks)
2007-11-28: 13.3.0.140: PCB without schematic: The online library is now available when importing packages
2007-11-28: 13.3.0.140: DXF import: Entity ELLIPSE is now recognized
2007-11-27: 13.3.0.140: Message "Tear component to pieces" can now be set for schematic and PCB separately
2007-11-27: 13.3.0.140: Now also inner copper layers are displayed in 3D view
2007-11-21: 13.3.0.140: DXF import: Replaced short arcs having a huge radius and a center lying far out by straights
2007-11-16: 13.3.0.113: Replaced all SMTP accesses by HTTP accesses
2007-11-15: 13.3.0.113: Assign symbol to a free package: List of symbols without packages is sorted now
2007-11-13: 13.3.0.104: Symbol handles in schematics have a checkmark, if the component has already a placed package
2007-11-12: 13.3.0.104: Convert project into "PCB without schematic": 3D models vanished
2007-11-12: 13.3.0.104: DRC: Sometimes the value of the minimum spacing in the summary was wrongly zero
2007-11-09: 13.3.0.104: DRC: Error message "Drillhole in SMD Pad" switchable
2007-11-05: 13.3.0.91: DRC: Several different ground planes in one copper layer: Spacing of one plane to another is checked too
2007-10-31: 13.3.0.78: Added export of netlists in Pads-PowerPCB V3.0 format
2007-10-31: 13.3.0.78: Isolation milling: ColinBus: Bottom side is not mirrored, as ColiDrive V2.2.0.44 does that itself
2007-10-25: 13.3.0.66: Export to Eagle: Improved handover of busses
2007-10-25: 13.3.0.66: DRC: Bridges are only capable of creating short cuts with their ends
2007-10-24: 13.3.0.62: Background pin check wrongly also counted the REFs pins: This could lead to access violations (discover)
2007-10-24: 13.3.0.62: Removed hierarchy browser
2007-10-24: 13.3.0.62: Moved functions of the hierarchy browser to menu "Settings"
2007-10-20: 13.3.0.62: Highlighting selected elements: Light/dark or extra color: Separately selectable for schematic and PCB
2007-10-17: 13.3.0.62: Context menu (M2 popup): Added Cut, Copy, Paste and Duplicate to context menu
2007-10-15: 13.3.0.62: Text elements are now also copied additionally as text into the clipboard (Insert contents in word program)
2007-10-15: 13.3.0.62: Naming of the emerging signal islands when ripping up a signal: Improvement of the change from 21.03.2005
2007-10-15: 13.3.0.62: Selected elements are drawn last (topmost) within each layer
2007-09-25: 13.3.0.26: TrueType fonts on the screen: Improved displayed text size when zoom is low
2007-09-23: 13.3.0.16: DXF output: Solder paste (cream) was not always exported
2007-09-21: 13.3.0.16: The Windows Taskbar displays the name of the current project, instead of only "TAR3001"
2007-09-20: 13.3.0.6: The aura of rectangles, triangles, slices and texts is now also regarded for rasterization of ground planes
2007-09-20: 13.3.0.6: Improved converter for Eagle libraries
2007-09-18: 13.3.0.6: !VARNR as text function for the variant number
2007-09-17: 13.3.0.6: Redirected the help for the working modes to the Wiki
2007-09-17: 13.3.0.6: Dual screen systems: Messageboxs appear on the correct screen
2007-09-14: 13.2.0.70: Redirected the help in dialogs to the Wiki
2007-09-12: 13.2.0.66: Isolation milling for Colinbus machines
2007-09-12: 13.2.0.66: Printing dialog: Show variants with variant number
2007-09-12: 13.2.0.66: Variants dialog: Activate a component for all variants or for none
2007-09-12: 13.2.0.66: Clipboard: Also single elements of several symbols / packages can be copied
2007-09-10: 13.2.0.66: 3D view also displays tracks made of arcs and splines
2007-09-08: 13.2.0.66: Expansion of the PCB-Pool calculator for new PCB-Pool products
2007-09-07: 13.2.0.66: HPLG outputs for drill holes now execute a minimal X-movement so that they are not ignored by several HPGL viewers
2007-08-28: 13.2.0.53: TARGET sometimes didn't start, if a T3001 file was double-clicked in Windows explorer
2007-08-21: 13.2.0.53: Improved mirrored printing of texts with a TrueType font
2007-08-20: 13.2.0.53: When moving component or signal names the affilation is indicated by a line
2007-07-13: 13.2.0.53: XGerber and drill: Inserted an extra button top right in PCB view and assigned the shortcut key [F11]
2007-07-13: 13.2.0.53: Generic HPGL driver: Coordinate units can be switched: 0,025 mm and 0,0254 mm
2007-07-10: 13.2.0.8: Generic HPGL driver: Splines can be converted too
2007-07-09: 13.2.0.8: PCBout: Drill file export Excellon: Header parts "M48" and "METRIC" can be switched off
2007-07-06: 13.2.0.5: Vias as padstacks: Sometimes the signal name of such a via was not changeable
2007-07-05: 13.2.0.5: Component export: Selection of prposed package: Inserted preview picture
2007-07-05: 13.2.0.5: List of the 20 components last recently used: Inserted preview picture
2007-07-05: 13.2.0.5: Improvement of components that have different names in different languages
2007-07-02: 13.2.0.5: List of the 20 components last recently used: Button [X] did not remove a component from the List
2007-06-28: 13.2.0.3: PCBout: Notice is given, if a TrueType font is not matched exactly
2007-06-28: 13.2.0.3: Introduced property "Aura" for rectangles, triangles, slices and text elements
2007-06-26: 13.1.0.11: Mouse click M2h with key [Shift] or [Ctrl] moves the page according to mouse movement
2007-06-21: 13.1.0.7: Backups in a monthly or weekly cycle sometimes caused problems during project saving
2007-06-12: 13.1.0.7: Mil is the standard unit in the english version now (1/1000 inch)
2007-06-01: 13.1.0.7: PostScript output: Paper sizes also possible in landscape format
2007-05-29: 13.1.0.7: The appendixes _IEEE and _DIN are cut off for the component names when importing components
2007-05-24: 13.1.0.7: XGerber and Excellon import: Excellon import now also understands decimal coordinates
2007-05-24: 13.1.0.7: PCBout: Excellon output uses METRIC and decimal coordinates because of higher precision
2007-05-23: 13.1.0.7: Dialog "Settings": Inserted buttons for weekly and monthty backup
2007-05-23: 13.1.0.7: Excellon import: Command METRIC was ignored sometimes
2007-05-16: 13.0.0.44: PCBout: After cration of a new folder for the folder tree view this new folder can now be selected
2007-05-16: 13.0.0.44: XGerber import: With G36/G37 polygons an entered offset was taken twice
2007-05-10: 13.0.0.44: Symbol export: Component description in english, french or german
2007-05-09: 13.0.0.44: PCBout: Using option "G36 / G37 commands directly", adjacent triangles are combined to polygons
2007-05-08: 13.0.0.31: PCBout dialog: Long file paths are abbreviated properly
2007-05-04: 13.0.0.31: Select whole signal: Sometimes pin names on other schematic sheets were selected too
2007-05-04: 13.0.0.31: Accelerated online component search and made it more flexible
2007-05-04: 13.0.0.31: Accelerated online library update
2007-04-27: 13.0.0.31: Symbol export: The type of the component is directly sorted into the search tree
2007-04-24: 13.0.0.31: DRC: Error message for drill in a SMD padstack
2007-04-22: 13.0.0.25: PCB-Pool Calculator, Frontpanel Calkulator: Credit card "Valid thru" up to 2013 possible
2007-04-22: 13.0.0.25: WK-Mechanik Frontpanel Calculator: Silk screen color was sometimes shown different than selected
2007-04-20: 13.0.0.25: Placing signal traces in schematic ends, if something is hit
2007-04-19: 13.0.0.25: Centering marks (Fiducials) can now have a signal too
2007-04-18: 13.0.0.25: Automatic start of the autoplacer can be switched off
2007-04-18: 13.0.0.25: Automatic start of the PCB outline wizard can be switched off
2007-03-29: 13.0.0.10: Component import: If a component was not found, one can request it from IBF
2007-03-23: 13.0.0.8: PCB without placed packages: Autoplacer starts automatically
2007-03-23: 13.0.0.8: PCB with missing PCB outline: Outline wizard starts automatically
2007-03-22: 13.0.0.8: Autoplacer: Components also placeable outside obove the PCB outline
2007-03-22: 13.0.0.8: Autoplacer: SMDs also placable on bottom side
2007-03-22: 13.0.0.8: Autoplacer: Place a certain component group only (property "MODULE")
2007-03-22: 13.0.0.8: Altered HTTP calls, improved internet access (auto update etc.)
2007-03-18: 13.0.0.8: Min. width and min. spacing can now be entered for several signals together
2007-03-15: 13.0.0.1: Mirror without flipping: Package property "flipped" is not affected
2007-03-11: 13.0.0.1: Hybrid autorouter: Optimisation from pass 2 sometimes didn't have any effect
2007-03-10: 13.0.0.1: Route prohibitions now work with the hybrid autorouter even when used in padstacks
2007-03-07: 13.0.0.1: XGerber import: The files to import are displayed as texts within the dialog
2007-03-07: 13.0.0.1: XGerber import: G71* as a switch to metric coordinates did not work in all cases
2007-03-07: 13.0.0.1: TARGET 3001! V12 stands still, the current version is now V13
2007-03-02: 12.6.0.137: Font Din-Iso-Ansi: Cypher 5 closed less, to avoid a mix-up with cypher 6
2007-03-01: 12.6.0.137: XGerber output: Font Din-Iso-Ansi is completely supported, even inverted in ground planes
2007-02-23: 12.6.0.137: Isolation milling: RubOut now also deletes copper in thick auras
2007-02-23: 12.6.0.137: Librarybrowser: English and French version sometimes had too many results when searching
2007-02-20: 12.6.0.137: If a local search for components gives no results, an online search is following automatically
2007-02-16: 12.6.0.124: PCB-Pool Calculator: Computation of delivery prices sometimes selected wrong countries
2007-02-12: 12.6.0.124: Symbol export: When gathering symbols with [y] the symbol swap number got lost
2007-02-01: 12.6.0.112: Sim.exe: A stimulus e.g. (200ms 0) (200ms 1) ...{2 x 200ms; effectively false input} with connected delay caused false results.
2007-02-01: 12.6.0.112: Sim.exe: (postprocessor) False view of digital signals if probe signals renamed.
2007-02-01: 12.6.0.112: French lowercase and uppercase special characters are exchanged correctly
2007-01-31: 12.6.0.93: Printing: Sometimes a scale display was not updated correctly
2007-01-30: 12.6.0.93: Launch ground plane assistant several times: Old ground planes in that layer are deleted first
2007-01-30: 12.6.0.93: WK-Mechanik Frontpanel Calculator: "Silk screen black" was not possible in some cases
2007-01-25: 12.6.0.86: PCB-Pool Calculator: New delivery computation
2007-01-24: 12.6.0.86: Introduced preview pictures in online library search
2007-01-24: 12.6.0.86: 3D model reloadable from a library package
2007-01-24: 12.6.0.86: Component properties reloadable from a library component
2007-01-24: 12.6.0.86: Treeview of components in sorted order
2007-01-23: 12.6.0.86: Assignment of copied symbols in schematic and copied corresponding packages in PCB sometimes failed
2007-01-22: 12.6.0.86: "Shift drawing into the center" sometimes damaged the rests of components that were not inserted yet
2007-01-01: 12.6.0.67: Packages can be locked against any movement
2006-12-21: 12.6.0.49: English and French versions sometimes had problems with a german name in the entry "proposed package"
2006-12-19: 12.6.0.32: XGerber import: Self intersecting G36/G37 polygons are split and displayed separately
2006-12-15: 12.6.0.32: Editing of component names in panelized boards sometimes had problems with the text content
2006-12-13: 12.6.0.24: Dragging of segment corners was slow with big projects
2006-12-12: 12.6.0.9: Improved output for PDF printers (e.g.: Adobe Acrobat Distiller or freePDFxp.de)
2006-12-12: 12.6.0.9: Improved the look of rounded line caps (which caused spikes with arcs and splines)
2006-12-11: 12.6.0.1: Placing tracks: Setting the aura with [o] like options: Aura is directly remembered
2006-12-11: 12.6.0.1: Info dialog now contains: N° of copper layers, N° of Drills, N° of SMD pads, length of PCB outline
2006-12-08: 12.6.0.1: Error markers can now be deleted like normal elements
2006-12-06: 12.5.0.156: Displacing now allows only orhogonal movements if key [Shift] is depressed
2006-12-06: 12.5.0.156: Sometimes the mouse cursors shown were wrong
2006-12-06: 12.5.0.156: Bus assistant can work with different steps: A0, A2, A4, A6, A8, ...
2006-12-04: 12.5.0.156: XGerber import: Import of arcs with wrong center point is now more tolerant (Error "Center point wrong")
2006-12-03: 12.5.0.156: Free drill holes in components (e.g. fixation holes) can now have a signal assigned
2006-12-03: 12.5.0.156: Also ground plane elements with signal that are part of a component are considered for the creation of thermal pads
2006-12-03: 12.5.0.156: Improved handling of multiline text
2006-12-03: 12.5.0.156: TIFF export output has the correct resolution information
2006-11-29: 12.5.0.156: Components with property SIM_MODEL_NEEDED=NO no longer cause a warning in the simulation (e.g. connectors)
2006-11-29: 12.5.0.156: Sometimes packages with translated names (from German to English) were not assigned to their components correctly
2006-11-22: 12.5.0.156: Some thermal pads that were generated automatically caused spacing violations
2006-11-16: 12.5.0.114: XGerber import: Polygons with circular edges possible
2006-11-16: 12.5.0.114: XGerber import: Also some self intersecting polygons with G36+G37 can be imported
2006-11-15: 12.5.0.114: WK calculator: Front panels with engraved TrueType fonts are not allowed
2006-11-15: 12.5.0.114: PCB Pool calculator: PCB smaller than 1cm² caused a division by zero error
2006-11-15: 12.5.0.114: Changed selection of the colors black and white for the checks in the layer toolbar
2006-11-14: 12.5.0.114: When editing elements or when importing packages no layers are switched visible unintentionally
2006-11-14: 12.5.0.114: Symbol and package dialog: X and Y coordinates can be adjusted separately
2006-11-13: 12.5.0.114: Key [o] also works when measuring and dimensioning
2006-11-10: 12.5.0.114: Converting a ground plane into lines sometimes caused many slight spacing violations
2006-11-01: 12.5.0.75: PCBout: Minimized the error concerning the aura of round pads
2006-10-31: 12.5.0.74: Enlarged limit for TARGET 3001! V12 discover (=demo) from 100 to 250 pins
2006-10-27: 12.5.0.74: Properties of several selected elements can now also be renamed and also be deleted
2006-10-24: 12.5.0.74: PCBout: Drill padstacks extra: Sometimes the normal drill file was empty (layer 100)
2006-10-24: 12.5.0.74: The respective view is remembered when toggling schematic sheets inside the same window
2006-10-23: 12.5.0.74: Search on online library server: Number of components displayed up to 1000 pcs
2006-10-20: 12.5.0.39: XGerber import: Several primitives possible in one aperture macro
2006-10-20: 12.5.0.39: Solved problem with DIN-ISO-ANSI text font in PostScript driver
2006-10-20: 12.5.0.39: DRC, check spacing: Improvement regarding corners of rectangular pads
2006-10-19: 12.5.0.39: Removed memory leaks in simulation model management
2006-10-10: 12.5.0.31: Design rule check: Introduced new error message: Drillhole in SMD pad
2006-10-10: 12.5.0.31: XGerber import ignored %MOMM% command, which could lead to coordinate overflows
2006-10-10: 12.5.0.31: PCBout: Layer numbers preceding every line in the selection box
2006-10-08: 12.5.0.31: Blockdiagrams: Reorganisation sometimes affected the signals of the REF pins in the blocks
2006-10-06: 12.5.0.31: Bill of material: Component property "BILL_OF_MATERIAL=NO" prevents a component to be listed
2006-10-06: 12.5.0.31: PCBout: Solder paste masks are proposed to be output automatically
2006-10-05: 12.5.0.31: Library udate: TARGET allocated more and more main memory (possible consequence was: error "out-of-memory")
2006-10-02: 12.5.0.31: Update manager: TARGET crates a copy of the old TarV12.exe, if it is updating itself
2006-10-02: 12.5.0.31: Added GenCAD as an output format
2006-09-28: 12.5.0.1: Creating ground planes: Unconnected islands can be omitted automatically
2006-09-28: 12.5.0.1: Added FABmaster as an output format
2006-09-26: 12.5.0.1: Component update via IBF online server now also adds components, that are newly declared as belonging to the standard library
2006-09-26: 12.5.0.1: Capability for AML (Active Multi Layer, Components inside the PCB)
2006-09-26: 12.5.0.1: "Component out of date" flag in library browser
2006-09-26: 12.5.0.1: Dialog "Signal wire": Focus to "Minimal width" or to "Width", instead of "Signal" (because of scroll wheel)
2006-09-26: 12.5.0.1: Blocked 0 (zero) as pin number in schematics
2006-09-21: 12.4.0.159: Sim.exe: w primitives in subcircuits not correctly expanded. Error message "w:f1:1: unknown controlling source f1:vv1"
2006-09-20: 12.4.0.158: Simulation postprocessor(probe): Logarithmic grading if log. display.
2006-09-20: 12.4.0.158: Simulation postprocessor(probe): No monkey numbers (grading) on x/y-axis !
2006-09-20: 12.4.0.158: Simulation postprocessor(probe): WYSIWYG in <postprocessor - print - clipboard> improved.
2006-09-19: 12.4.0.158: Copying modules / channels via clipboard: Improved assignment of packages to existing schematic symbols
2006-09-18: 12.4.0.158: XGerber import: Solved problem with missing CR/LFs
2006-09-08: 12.4.0.158: Pick&Place export and BOM now exactly have the same content for "package used"
2006-09-07: 12.4.0.158: Automatic exchange of prefixes during component import: e.g. IC=U; T=Q; K=JP
2006-08-28: 12.4.0.128: Elektra router: Signal dedicated layers can be ground plane layers or signal layers
2006-08-28: 12.4.0.128: PCB pool: Calculator uses different kind of HTTP and the SMTP server given in the registry is used
2006-08-28: 12.4.0.128: Library browser: Component renaming sometimes resulted in deletion of the component
2006-08-28: 12.4.0.128: Library browser: IEEE / DIN selectable
2006-08-25: 12.4.0.128: Variants: Several components can be assigned to different variants simultaneously
2006-08-23: 12.4.0.128: Move elements: Crosshair and phantom picture are always shown directly, not only after a mouse movement
2006-08-20: 12.4.0.110: Pick&Place export: Now centering marks (fiducials) can be exported too
2006-08-20: 12.4.0.110: Library browser: Property assistant: PROPOSED_PACKAGE_LIB and PROPOSED_PACKAGE are changeable now
2006-08-10: 12.4.0.110: Measuring: Added angle display to status line
2006-08-06: 12.4.0.110: Import of SMD components ot the solder side: Copper layer is not switched visible unintentionally
2006-07-25: 12.4.0.95: Introduced multi line text
2006-07-24: 12.4.0.95: Grid button in pad dialog also correctly works with relative coordinates
2006-07-24: 12.4.0.95: Proxy password is saved encrypted
2006-07-24: 12.4.0.95: XGerber import: Improved processing of metric XGerber data
2006-07-23: 12.4.0.95: Key [F2] for library browser also works in an empty TARGET main window, without a project opened
2006-07-21: 12.4.0.91: The teardrop funktion (teardrop shaped pads) does not cause airwires any more
2006-07-21: 12.4.0.91: Accelerated HTTP method "Sockets"
2006-07-20: 12.4.0.81: Selectable HTTP internet access method (Sockets - WinInet)
2006-07-20: 12.4.0.81: A package without Symbol can be assigned to a symbol without package retroactively
2006-07-19: 12.4.0.81: Menu "Help": Inserted dialog to report translation problems
2006-07-17: 12.4.0.73: XGerber import: Macros using variables now possible
2006-07-11: 12.4.0.68: Improved internet access (HttpOpenRequest)
2006-07-11: 12.4.0.68: Schematic: Try to keep component numbers (IC12, R37) when importing from clipboard
2006-07-10: 12.4.0.57: Put new Future Manager (Wish Manager) into operation
2006-07-04: 12.4.0.42: Range error in hybrid router lead to an access violation
2006-07-03: 12.4.0.42: Isolation milling: NCP: Height for tool change now 4 mm
2006-07-03: 12.4.0.42: Isolation milling: NCP: Movements outside the material now at height 2 mm
2006-07-03: 12.4.0.42: XGerber: New possibility for export of masses of triangles
2006-06-29: 12.4.0.32: Improved HTTP requests for proxy servers
2006-06-29: 12.4.0.32: Improved mouse wheel reaction
2006-06-29: 12.4.0.32: Import filter for netlists in Pads-Logic format (*.ASC)
2006-06-28: 12.4.0.32: Reo still united collinear track segments, even if they had different auras (s. 03.04.2006)
2006-06-26: 12.4.0.14: Put new fast Linux component server into operation
2006-06-09: 12.3.0.124: Deleted symbols of components with several symbols has been allways included by the simulator (TA.Signal<>0).
2006-06-09: 12.3.0.124: Simulator: Bugfix with open-collectors (bug: DA-conveter input gets x-state instead of z-state).
2006-06-09: 12.3.0.124: Inserted menu point "Mirror without flip" in menu "Edit"
2006-06-09: 12.3.0.124: The current working copper layer can optionally be displayed as topmost
2006-06-08: 12.3.0.124: Clipboard: TARGET assigns copies in layout view to former copies in schematic view
2006-06-05: 12.3.0.124: Saving of the buttons in layer toolbar can also work with serveral "copper inside" layers
2006-05-31: 12.3.0.124: Smallest aperture in PCBout now 0,025 mm instead of 0,05 mm (< 1 mil)
2006-05-31: 12.3.0.124: Create thermal pads: Sometimes some possible bridges were not created
2006-05-24: 12.3.0.124: Components with prefix SP caused problems when selecting connected signals
2006-05-18: 12.3.0.124: Relative coordinates also available in element dialogs
2006-05-17: 12.3.0.124: Function "Round corner" sometimes brought the wrong message "More than two lines!"
2006-05-12: 12.3.0.124: Isolation milling only bottom side: Mirroring is now vertical (using horizontal axis)
2006-05-11: 12.3.0.124: Added EasyPC as a Gerber import filter
2006-05-05: 12.3.0.124: Auto placer can also be restricted to the components of one schematic page
2006-05-04: 12.3.0.124: Selection Assistant: Errors ocurred because of the very long entries in property 3D-MODEL
2006-04-30: 12.3.0.124: Status line: Signal length of a selected signal: Only selected signal segments count (S=...)
2006-04-28: 12.3.0.124: XGerber import: Gerber lines only separated with '*' without CRLF also work by now
2006-04-27: 12.3.0.124: Block diagrams: New terminals can now be assigned to existing blocks
2006-04-27: 12.3.0.124: Accumulated bill of material (BOM) lists names of components in one cell
2006-04-25: 12.3.0.42: XGerber import: Support for "trailing zeroes omitted"
2006-04-24: 12.3.0.42: Library browser: Sorting of components in the libraries is really alpha-numerical now
2006-04-24: 12.3.0.42: Library browser: Windows focus is now directly on the selected component
2006-04-24: 12.3.0.42: Component export: Sometimes the dialog buttons did not behave correctly when overwriting existing components
2006-04-16: 12.3.0.26: Improved zooming out with the mouse wheel
2006-04-15: 12.3.0.26: Inserted menu point "Load bitmap into rectangle" into menü "Actions"
2006-04-15: 12.3.0.26: Extra colors for single elements have been disregarded if the element was highlighted
2006-04-15: 12.3.0.26: In spite of X-Ray view with [#], extreme short tracks were shown as filled circles
2006-04-15: 12.3.0.26: Added signal properties also to track dialog (min. width, min. spacing, color of airwires)
2006-04-03: 12.3.0.15: Reo united collinear track segments, even if they had different auras
2006-04-03: 12.3.0.15: Design rule check: Wrongly ground planes collided with bridges
2006-04-03: 12.3.0.15: Removed reorganisation dialog before design rule check
2006-03-22: 12.3.0.15: Interface to Electra2L router is now capable of 2 copper layers and an unlimited number of ground plane layers
2006-03-20: 12.3.0.15: Bugfix (infinite loop) in stimulus editor.
2006-03-19: 12.3.0.15: PostScript: TrueType text was too wide in some cases
2006-03-16: 12.3.0.15: PCBout sometimes caused an accessviolation directly after pressing [Start]
2006-03-10: 12.3.0.15: Pick&Place: Remembers company entries and inserts the name of the variant used
2006-03-10: 12.3.0.15: Spice: Removed "INPgetTree" error in subcircuit generator
2006-03-10: 12.3.0.15: RoHS information in component properties
2006-03-03: 12.3.0.15: BOMs now available in CSV-Format (Bill Of Material, Comma Separated Value)
2006-03-01: 12.2.0.179: When importing symbols sometimes only packages were offered
2006-02-28: 12.2.0.179: Removed warning at program start concerning wrong windows font size
2006-02-16: 12.2.0.132: Improvement of the online library server regarding internet access via proxy
2006-02-13: 12.2.0.130: Zoom out with the mouse wheel does not skip around, if mouse moved meanwhile
2006-02-13: 12.2.0.130: Speed of zoom with the mouse wheel is adjustable (0=scroll instead of zoom, negative = reverse)
2006-02-13: 12.2.0.130: The small black selection boxes stayed visible though schematic page was toggled
2006-02-13: 12.2.0.130: Program help was not usable in some cases
2006-02-08: 12.2.0.125: The list of components for manually importing packages can now be sorted ascending or descending
2006-02-08: 12.2.0.125: Restricted the width of bridges of automatic thermal pads to 1/2 of the height or width of the pad
2006-02-08: 12.2.0.125: "Rest copper ring too thin" is now reported during check, even if the drill hole is bigger than the pad
2006-01-31: 12.2.0.122: When loading a package, missing layers are created
2006-01-26: 12.2.0.122: Eagle libraries can be output from library browser's context menu
2006-01-25: 12.2.0.122: Component export dialog also remembers the last recently used library
2006-01-19: 12.2.0.109: Vendor information also visible in symbol dialog
2006-01-19: 12.2.0.109: "Choose signal from bus" dialog increments signal names automatically: A0 -> A1 -> A2 ...
2006-01-19: 12.2.0.109: Cursor of "Choose signal from bus" dialog is on button [Ok] instead of [Bus assistant]
2006-01-13: 12.2.0.106: 3D models of mirrored components are shown correctly
2005-12-23: 12.2.0.96: Search and Replace a Kind of Package: 3D model was not replaced sometimes
2005-12-21: 12.2.0.96: Bugfix of IO-Level-Mechanism in simulation kernel.
2005-12-20: 12.2.0.96: Isolation milling: Outline milling does not lift the tool too often
2005-12-19: 12.2.0.96: Isolation milling: Fiducial drillings now possible even if exporting single sided data
2005-12-13: 12.2.0.96: LibBrowser: Deleting a component raised a wrong error message
2005-12-13: 12.2.0.96: Dialog "Settings and Options" with a new tree-view field for the selection of the library directory
2005-12-13: 12.2.0.96: Broadened "start assistant dialog", elongated "property dialog"
2005-12-09: 12.2.0.78: DRC: Error "Signal unfinished" now got coordinates
2005-12-09: 12.2.0.78: Isolation milling "CharlyRobot": Mirroring of "vopper bottom" sometimes did not work
2005-12-08: 12.2.0.78: During online program update the progressbar was not updated properly
2005-12-07: 12.2.0.74: PCB-Without-Schematic: Sometimes vias were not correctly transferred to the new signal when connecting
2005-12-06: 12.2.0.74: Isolation milling: It's possible now to mill holes inside the PCB and to cut the outline with a burin
2005-12-04: 12.2.0.65: Centering marks (fiducials) in schematic were deleted during reorganisation
2005-12-02: 12.2.0.65: Isolation milling sometimes milled all across the PCB, if the user chose "Drill at the end"
2005-11-30: 12.2.0.65: An access violation could occur after drill file export
2005-11-25: 12.2.0.28: Path for help files can now be edited in the hierarchy browser
2005-11-23: 12.2.0.28: The aura of pads now also depends on the drill hole if this is larger than the copper pad itself
2005-11-18: 12.2.0.15: Library browser sometimes used the wrong sheet on reopen
2005-11-17: 12.2.0.15: Improved installation and uninstall
2005-11-15: 12.2.0.15: Reload of component form: Often the settings of the pins were not replaced
2005-11-09: 12.1.0.210: Drills in padstacks are displayed dased if they do not touch a visible layer
2005-11-02: 12.1.0.210: Searching and zooming a big signal (e.g. GND) sometimes shrinked the view
2005-10-25: 12.1.0.170: Bill of material: Leading and trailing spaces are deleted with self defined properties
2005-10-24: 12.1.0.170: Modern, scalable dialogs for opening and saving files
2005-10-24: 12.1.0.170: Improved triangulation of polygons
2005-10-24: 12.1.0.170: Selection rectangles with context menu for dragging-deleting-inserting vertices in polygons
2005-10-20: 12.1.0.159: The help window stayed always on top
2005-10-20: 12.1.0.159: Sometimes static cross hairs remained if another window overlapped
2005-10-10: 12.1.0.146: Length of splines and toruses is shown during creation and changing
2005-10-10: 12.1.0.146: Accelerated the start of TARGET, the updatemanager opens at the end of the program
2005-10-10: 12.1.0.146: Dispatch of first TARGET 3001! V12
2005-10-07: 12.1.0.146: Online access and update of libraries
2005-10-07: 12.1.0.146: Inserted 3D-View
2005-10-06: 12.1.0.146: Search and download of components from the IBF component server
2005-09-30: 12.1.0.146: Hybrid-Router: Fixed access violation with signals that only appeared in schematic
2005-09-19: 12.1.0.127: PostScript dialog: Settings are remembered as long as TARGET is running
2005-09-15: 12.1.0.127: Electra-Router: Planes with signals are regarded, e.g. ground planes
2005-09-12: 12.1.0.100: Electra-Router: Pre-routed vias are handed over with the correct size
2005-09-12: 12.1.0.100: Electra-Router: Corrected the regard of toruses and splines within the PCB outline
2005-08-30: 12.1.0.27: Package dialog: Provided change of property "Rotation" with a warning hint
2005-08-26: 12.1.0.12: PCBout: Solved problem in ground planes with needle-sharp triangles
2005-08-23: 12.1.0.12: Added "Manual Placer" into menu "Actions" for linear, matrix-shaped and radial component arrangements
2005-08-21: 12.1.0.12: Under certain circumstances TARGET created very long tracks at random
2005-08-15: 12.1.0.12: Included HPGL.exe into TARGET
2005-08-13: 12.1.0.12: Included Post.exe into TARGET
2005-08-12: 12.1.0.12: Included DXF.exe into TARGET
2005-08-11: 12.1.0.12: Included GDS II into TARGET
2005-08-11: 12.1.0.12: Included Bohr.exe into TARGET
2005-08-11: 12.1.0.12: Included PCBout.exe into TARGET
2005-08-10: 12.1.0.12: Inserted point "Duplicate" into menu "Edit"
2005-08-10: 12.1.0.12: Devided menu "Input and output formats"
2005-08-09: 12.1.0.12: Isolation milling recognizes PCB type and remembers output format
2005-08-03: 12.1.0.12: Hierarchy browser: Context menu point "Show" gives no warning message any more
2005-07-29: 12.1.0.12: Electrical rule check ERC sometimes regarded those symbols of components that were not placed yet
2005-07-26: 12.1.0.12: Inserted new layer dialog
2005-07-21: 12.1.0.3: Isolations milling CharlyRobot: Before drilling now the desired immersion speed is set
2005-07-20: 12.1.0.3: Reorganisation: "Merge collinear signal segments" also regards busses
2005-07-18: 12.1.0.3: Isolation milling: New switch "Always select new tool for bottom side"
2005-07-11: 12.1.0.3: Package dialog: Provided change of property "Flipped" with a warning hint
2005-07-07: 12.1.0.3: Bill-Of-Material also exports variant properties of components
2005-07-05: 12.1.0.3: Electra-Router: No keepouts for pads
2005-07-05: 12.1.0.3: Pick&Place list also separated into SMD/THP or top/bottom
2005-07-05: 12.1.0.3: XP-Style GUI (luna) not only for window borders but also possible inside the dialogs
2005-06-30: 12.1.0.2: Create package: Two pads with the same pin number did not work properly
2005-06-30: 12.1.0.2: V11 stands still, changes and new features now for V12
2005-06-24: 11.7.1.43: Renaming a variant also renames the variant properties of components
2005-06-23: 11.7.1.43: Added Button [Variants] also in package dialog
2005-06-22: 11.7.1.43: "Check project" in certain cases did not recognize a spacing violation of a pad to a ground plane
2005-06-22: 11.7.1.43: PCBout.EXE: Holes in characters with TrueType font were displayed as filled by some CAMs
2005-06-22: 11.7.1.43: PCBout.EXE: Character width of TrueType fonts was ignored
2005-06-21: 11.7.1.43: Error localization for interactive elements implemented and error handling bugfix.
2005-06-17: 11.7.1.43: Bugfix in logarithmic x axis for print, clipboard, etc.
2005-06-14: 11.7.1.16: Solder stop and solder paste now work in dialog "Via options"
2005-06-09: 11.7.1.15: Single track paths could not be copied via clipboard any more
2005-05-30: 11.7.1.11: Inserted menu point "Link to library" into library browser
2005-05-24: 11.7.1.11: DRC: Project name is used for the name of the check textfile: e.g. PIC.ERR3001 instead of TARGET.ERR3001
2005-05-24: 11.7.1.11: Inserted menu point "Select all" into menu "Edit"
2005-05-19: 11.7.1.3: Airwires of imported components are activated
2005-05-19: 11.7.1.3: Resetting elements to standard color sometimes didn't work
2005-05-19: 11.7.1.3: Programmed buttons in via dialog now also save solder stop and solder paste
2005-05-19: 11.7.1.3: Fixed again problems with length determination of text elements
2005-05-18: 11.7.1.3: Output *.dif for DigitalTest testers
2005-05-18: 11.7.1.3: Output *.tgr for Polar Instruments testers
2005-05-18: 11.7.1.3: External autorouter: Padstacks are processed too
2005-05-11: 11.6.1.45: Parts of single symbols and Packages can now be copied via clipboard
2005-05-04: 11.6.1.41: PCBout: Errormessage, if PCB outline not correct
2005-05-03: 11.6.1.41: Isolation milling: Under certain circumstances the first tool change was left out
2005-04-29: 11.6.1.41: XGerber import also reads lines that start with '*'
2005-04-27: 11.6.1.33: Isolation milling: Tracks that had no rounded ends were output too long
2005-04-27: 11.6.1.33: Improved check of pads that are not placed orthogonal (e.g. rotatiton by 45°)
2005-04-26: 11.6.1.33: Inserted Variants into Pick&Place dialog
2005-04-26: 11.6.1.33: When deleting track segments, the signal is selected for airwire showing
2005-04-26: 11.6.1.33: When loading a project, all airwires are selected for showing
2005-04-26: 11.6.1.33: Text in a copper layer is now correctly handed to the Elektra router
2005-04-26: 11.6.1.33: Self defined layer functions with endings "top" or "bottom" are now recognized as complementary
2005-04-15: 11.6.1.23: NEW!!! in the simulator: Stimulus editor (editor for digital signals)
2005-04-15: 11.6.1.23: Smoothing function (e.g. in interactive LEDs; graph calculator) optimized (computing time has been very high)
2005-04-15: 11.6.1.23: The circuit of a subcircuit will not be regarded for the autohelp on "Create Target.Cir".
2005-04-15: 11.6.1.23: Quickstart-button is active only if interactive elements are placed.
2005-04-15: 11.6.1.23: No warning "no probe", if interactive elements are placed in schematic.
2005-04-15: 11.6.1.23: Not connected interactive elements caused loops.
2005-04-15: 11.6.1.23: Parser-convert-mechanism did not work (skipped), if first character unequal. ("B..." <==> "E... VALUE...")
2005-04-15: 11.6.1.23: False Message '... model already exists ...' when importing a symbol.
2005-04-15: 11.6.1.23: Adding component-model with import and instance: Pinassignment: Message "Model ... do not exist"
2005-04-15: 11.6.1.23: Bugfix 'V' ('V'+componentname) in current controlled sources.
2005-04-14: 11.6.1.23: Under mysterious circumstances a symbol sometimes had more than one handle cross
2005-04-14: 11.6.1.23: Incrementing padnames now properly works in schematic too, not only in PCB mode
2005-04-12: 11.6.1.12: Airwires are not activated unintentionally
2005-04-12: 11.6.1.12: Coordinate output now uses the Windows decimal separator instead of always using ","
2005-04-12: 11.6.1.12: Coordinate output sometimes had too many decimals
2005-04-11: 11.6.1.12: IDF 3D: PCB outline was displayed incorrect sometimes
2005-04-11: 11.6.1.12: Symbol exchange: Message, if the two symbols are out of different components
2005-04-08: 11.6.1.12: Padnames are incremented during component creation, even if they have more than one character ABX9 -> ABX10
2005-04-06: 11.6.1.12: Fixed some problems with length determination of text elements
2005-04-06: 11.6.1.12: Bus dialog: New signal names may be entered again
2005-03-30: 11.6.1.12: Insertes help index into help menu
2005-03-30: 11.6.1.12: Isolation milling with HPGL uses differnt tools for isolation and PCB outline
2005-03-29: 11.6.1.12: Black background when printing without "sharp black/white" is printed
2005-03-25: 11.6.1.12: Added points "Insert page" and "Delete page" in menu "Actions"
2005-03-24: 11.6.1.12: DRC: Improved detection of "Pin not connected"
2005-03-21: 11.6.1.12: When splitting signals the smaller island directly gets an automatic name (e.g. Sig$31)
2005-03-21: 11.6.1.12: When connecting signals with automatic names (e.g. Sig$31) no more question "GND or Sig$31 ?"
2005-03-21: 11.6.1.12: Inserted warning, if DEFAULT.T3001 or DEFAULTP.T3001 are missing during creation of a new project
2005-03-10: 11.5.1.98: The recognition of the package pin grid in the library browser disregards mounting holes now
2005-03-08: 11.5.1.98: Panelisation: Sometimes TARGET also placed a copy of the PCB over the original
2005-02-24: 11.5.1.88: Pin and pad swap sometimes forgot to exchange given padnames in schematic too
2005-02-22: 11.5.1.88: Imporved handling of read-only project files
2005-02-22: 11.5.1.88: Import of Eagle libraries: improved error messages
2005-02-15: 11.5.1.74: Import XGerber & Excellon: Leading- / Trailing-Zerors sometimes were mixed up
2005-02-12: 11.5.1.74: Inserted volume discounts into WK-Mechanik Calkulator
2005-02-10: 11.5.1.74: DXF import also reads SOLIDs
2005-02-02: 11.5.1.69: Front panel calculation: Solved problem with rectangular breakouts
2005-02-02: 11.5.1.69: "Reload component" and "Reload properties" had problems with PROPOSED_PACKAGE
2005-01-26: 11.5.1.69: Isolation milling / CharlyRobot: Implemented command 17: Show message and wait for user action
2005-01-24: 11.5.1.69: Import XGerber and Excellon: Manual setting of the drill factor possible
2005-01-24: 11.5.1.69: Isolation engraving ISO/DIN: Coordinates are always in decimal now: 12.0 instead of 12
2005-01-24: 11.5.1.69: PCBout.exe: Error, if no drill hole was in the PCB
2005-01-14: 11.5.1.69: Pick&Place output prefers to use the property ORIGINAL_NAME instead of the component name
2005-01-14: 11.5.1.69: "Panelisation" creates the property ORIGINAL_NAME for copied components
2005-01-14: 11.5.1.69: [F12] created the airwires several times
2005-01-11: 11.5.1.38: Under certain circumstances the new check routines worked erroneously
2005-01-07: 11.5.1.38: The path for application data (AppDataPath) was not used correctly in some cases
2005-01-05: 11.5.1.37: Introduced "page name" as a text variable
2005-01-04: 11.5.1.36: On certain computers the hybrid autorouter could cause a blue-screen
2005-01-03: 11.5.1.36: Counting of pins/pads: Vias and reference pins do not count any more
2004-12-30: 11.5.1.36: Isolation milling: Sometimes immersion depth was wrong in DIN-ISO format output
2004-12-28: 11.5.1.36: Authentication with HTTP over a proxy sometimes failed
2004-12-17: 11.5.1.23: Isolation milling: Tori were ignored in PCB outline milling
2004-12-10: 11.5.1.23: Front panel calculator, kind of material was ignored
2004-12-08: 11.5.1.23: Sometimes different font types were missing in text dialogs
2004-12-07: 11.5.1.23: At times the error "NIL cannot be assigned to TStringList" appeared
2004-12-03: 11.5.1.23: In very special cases "pin swap" did not work
2004-11-26: 11.4.1.118: Round pads in isolation milling are no longer octagons but 16 sided polygons
2004-11-26: 11.4.1.118: Coordinates in mm were cut after the 3rd decimal digit
2004-11-20: 11.4.1.114: Snap-On-Pad only works with pads/tracks of the same signal
2004-11-18: 11.4.1.104: During blinking for [s], the key [backspace] led into an ugly system state
2004-11-17: 11.4.1.97: Itroduced unit nm
2004-11-05: 11.4.1.89: Introduced IDF 3D output
2004-11-05: 11.4.1.89: Introduced realtime DRC
2004-11-03: 11.4.1.89: Introduced special path for application settings files (AppDataPath)
2004-11-02: 11.4.1.89: Added WK front panel calculator
2004-11-02: 11.4.1.89: Added front panel designer
2004-11-02: 11.4.1.89: Added mounting drill holes as an own element
2004-10-28: 11.4.1.89: PROTEL-Import: some powerobjects have got faulty names.
2004-10-22: 11.4.1.89: Limited buttons [:2] and [:5] in grid dialog to reasonable values
2004-10-18: 11.4.1.53: Added possibility to enter special characters
2004-10-18: 11.4.1.53: Introduced vector font "DIN_ISO_ANSI"
2004-10-10: 11.4.1.37: Backups and autosaves are stored into a subdirectory "BackupFiles"
2004-10-08: 11.4.1.37: "Search and replace comonent shape" could caused an error that prevented saving
2004-10-07: 11.4.1.37: Text with height and width up to 10cm possible
2004-09-24: 11.4.1.28: Inserted menue point "Dimension PCB" in menue "Actions"
2004-09-21: 11.3.1.126: "Import XGerber and Excellon" has now fields to enter OffsetX and OffsetY
2004-09-16: 11.3.1.126: Behr-Reo for composite signal names only for "number.number" i.e. "1.1","1.2".."2.1"..
2004-09-15: 11.3.1.126: Improved the computation of the enclosing rectangle of Windows fonts
2004-09-13: 11.3.1.125: Reorganisation of component numbers according to component position uses PCB or schematic
2004-09-13: 11.3.1.125: Component numbering uses gaps between existing components
2004-09-07: 11.3.1.120: Texts with a TrueType font can be mirrored
2004-09-06: 11.3.1.120: Added output for front panel milling to DXFout
2004-09-03: 11.3.1.120: PCBout: Polygons made of triangles sometimes caused problems
2004-08-30: 11.3.1.120: PCB outline wizard had problems with some break outs
2004-08-25: 11.3.1.98: PostScript: Instead of padnames always only pinnumbers were output
2004-08-25: 11.3.1.98: PCBout: Polygons as G36/G37 are no longer output as single triangles, but as seamless polygons
2004-08-25: 11.3.1.98: Isolation milling: Polygons made of triangles sometimes caused problems
2004-08-24: 11.3.1.98: Electrical rule check: Error "Output Error: Signal X" now with position marker
2004-08-24: 11.3.1.98: Electrical rule check: Error "Wrong REF Signal X" now with position marker
2004-08-24: 11.3.1.98: The bend mode for placing lines is saved in every window separately
2004-08-16: 11.3.1.98: Improved selection rectangles menu point "Segment into 45° grid"
2004-08-16: 11.3.1.98: Removed automatic adjustment during dragging of lines
2004-08-16: 11.3.1.98: Inserted "Linewidth" as entry down on the layer tool bar
2004-07-28: 11.3.1.85: "Centering holes only" in PostScript driver
2004-07-28: 11.3.1.85: Linewidth directly enterable below in layer toolbar
2004-07-26: 11.3.1.85: When loading a project, the components are directly adjusted to the current variant
2004-07-26: 11.3.1.85: Contour router ignored minimal width and spacing of signals (since 05.07.2004)
2004-07-19: 11.3.1.62: When using padstacks, some variant components were not shown dashed
2004-07-14: 11.3.1.48: Working with libraries sometimes caused problems or access violations since 29.06.2004
2004-07-14: 11.3.1.48: When drawing tracks, the length of the whole signal is shown in the status line (S=Xmil)
2004-07-12: 11.3.1.47: PCB layers with color "light gray" got "dark gray" when saving and reopening a project
2004-07-06: 11.3.1.40: Models-dialog with "Search" button for simplified model import (trying auto. pin assignment)
2004-07-06: 11.3.1.40: Models-dialog with "Auto" button for default models
2004-07-06: 11.3.1.40: Models-dialog simplified
2004-07-06: 11.3.1.40: Modelbrowser with model import from clipboard
2004-07-06: 11.3.1.40: Modelbrowser with spicemodel Google search
2004-07-06: 11.3.1.40: Bugfix in save "index exceeds maximum of list" (if items deleted in probe).
2004-07-06: 11.3.1.40: Bugfix in Target.Cir with reference symbols (SimModelIndex not >-1)!
2004-07-05: 11.3.1.40: Added "Minimum track width" and "Minimum track spacing" into dialog "Change Signal Wires"
2004-07-01: 11.3.1.30: Improved dialog "Connect signals"
2004-07-01: 11.3.1.30: Isolation milling: added output of text
2004-06-30: 11.3.1.30: Circles and toruses were not seen correctly by the hybrid router
2004-06-29: 11.3.1.30: Package elements on layer 25 were always deleted during reorganisation
2004-06-29: 11.3.1.30: Accelerated creation of library index files
2004-06-29: 11.3.1.30: Accelerated export of components
2004-06-23: 11.3.1.30: Data sheet and price info in "change symbol dialog"
2004-06-17: 11.3.1.30: Sometimes texts were displayed in a wrong color
2004-06-17: 11.3.1.30: Check PCB: Renamed "Short-cut", "Wrong connection" and "Spacing violation"
2004-06-17: 11.3.1.30: Selection rectangles for toruses allow to change a round bend back into a sharp bend
2004-06-16: 11.3.1.6: Apended interface to the high speed ELECTRA Shape Based Autorouter
2004-06-16: 11.3.1.6: Check project: Improved short-cut detection in schematic
2004-06-15: 11.2.1.102: Export to Eagle: Sometimes the message "Index exeeds maximum of list" appeared
2004-06-13: 11.2.1.102: Changing of component properties now also works for multiple components together
2004-06-13: 11.2.1.102: Selection assistant also selects symbols and packages according to component properties
2004-06-13: 11.2.1.102: [Enter]-key now works in property-dialog
2004-06-13: 11.2.1.102: Reference symbols are not saved in the list of the 20 most recently used components
2004-06-08: 11.2.1.102: Selection rectangles with context menu for dragging-deleting-inserting sharp bends and for rounding corners
2004-06-06: 11.2.1.102: Adjusted zoom factor for cross-probe
2004-06-06: 11.2.1.102: Inserted point "Zoom selected" into menu "View"
2004-06-04: 11.2.1.102: Inserted hierarchy browser as a menu point too
2004-05-17: 11.2.1.102: New project windows are directly displayed maximized, if advertisings are disabled
2004-05-13: 11.2.1.102: Import package: Sorting by alphabet regards numbers correctly: R1,..R9,R10,R11.. and not R1,R10,R11,R2..
2004-05-11: 11.2.1.74: The textbox in dialog "Help / Info" has now scrollbars
2004-05-11: 11.2.1.74: Texts in dialog "Help / Info" may now be loaded and saved extra
2004-05-10: 11.2.1.74: New project windows are directly maximized (in the non-demo-versions)
2004-05-03: 11.2.1.74: The menu entry "Edit Component Model" was sometimes missing in the library browser
2004-04-30: 11.2.1.74: "Rename PadStack" entered a wrong layer number
2004-04-29: 11.2.1.74: Multilayer: Improved output of PadStacks with PCBout
2004-04-29: 11.2.1.74: Multilayer: Change of layer with [.] or [:] now preferred uses the next to last used layer
2004-04-28: 11.2.1.74: Several output drivers did not recognize the text function !PROJECT
2004-04-28: 11.2.1.74: "Show signal" in hierarchybrowser sometimes changed the schematic page even if not necessary
2004-04-23: 11.2.1.61: Added isolation milling with CNC ISO 6983 or DIN 66025
2004-04-22: 11.2.1.61: Added possibility to enter Username and Password for Proxy
2004-04-22: 11.2.1.61: Inserted entry "Wheel mouse zoom reverted"
2004-04-22: 11.2.1.61: Removed a possible access-violation in hybrid router
2004-04-21: 11.2.1.61: Improved symbol assistant
2004-04-20: 11.2.1.44: Copying packages with the library browser damaged the destination librarie in some cases
2004-04-12: 11.2.1.34: The contents of the TARGET context menu changed
2004-04-12: 11.2.1.34: Right mouse click M2 creates the TARGET context menu instead of zooming in
2004-04-09: 11.2.1.34: Move/displace selected elements by a specified offset X/Y: [Shift]+[D]
2004-04-09: 11.2.1.34: TextIO also reads files with comma instead of colon as decimal separator
2004-04-08: 11.2.1.34: Grid dialog had problems with switching the unit more than once
2004-04-08: 11.2.1.34: Splines were forgotten sometimes during change of properties
2004-04-02: 11.1.1.216: Isolation milling: Double Pads were not isolated correctly in some cases
2004-04-01: 11.1.1.207: Isolation milling: Unconnected Pads were not isolated correctly in some cases
2004-04-01: 11.1.1.207: PCBout.EXE directly receives the filename of the current project
2004-03-31: 11.1.1.207: Loading of libraries and projects accelerated dramatically
2004-03-30: 11.1.1.184: Clipboard also copies drawings from schematic view to layout view and vice versa
2004-03-25: 11.1.1.184: Toruses with a very small spanned angle were not displayed sometimes
2004-03-25: 11.1.1.184: Reorganisation puts signal segments together, if they lie in a line
2004-03-22: 11.1.1.159: HPGL.exe now also exports center coordinates of slices (for dispensing glue of SMD components)
2004-03-17: 11.1.1.154: Introduced new algortihm for isolation milling
2004-03-16: 11.1.1.154: Bugfixes in "EAGLE-Export" (using several sheets, components including several symbols, problematic pad names).
2004-03-11: 11.1.1.141: Check schematic: "Island without REF" shows error coordinates now
2004-03-08: 11.1.1.133: Component import: Component names ending with blank did not work
2004-03-07: 11.1.1.133: Hybrid-Router used dispropotionately long time for certain problems
2004-03-05: 11.1.1.51: When working with cross-hair, often old cross-hairs remained and the screen had to be repainted
2004-03-04: 11.1.1.51: Bill-Of-Material: Ordering is now true alphanumeric: R1,R2,..R9,R10.. and not R1,R10,R2..
2004-03-04: 11.1.1.51: Bill-Of-Material can be exported in Excel-Format *.xls (BIFF) too
2004-03-04: 11.1.1.51: Bill-Of-Material: Equal components can be summarized: 3 x 7400 etc.
2004-03-03: 11.1.1.51: Help did not start correctly in some cases
2004-03-01: 11.1.1.51: During movement of a component: Zooming works also with [pg up] and [pg dn]
2004-03-01: 11.1.1.51: Using mouse wheel inside a scrollbar rolls picture up/down or left/right
2004-03-01: 11.1.1.51: Using mouse wheel inside the window zooms the picture in or out
2004-02-27: 11.1.1.51: Level-selection for multiple models per component sometimes didn't select the right model
2004-02-26: 11.1.1.51: "flat" command within Eagle libraries caused problems
2004-02-18: 11.1.1.51: Start with Drag&Drop or double clock onto a *.T3001 file: 8.3 names (exampl~1.t30) are replaced correctly
2004-02-17: 11.1.1.51: PadStacks are allowed as pads in packages too; inside libraries the identical names of the padstacks are regarded
2004-02-16: 11.1.1.51: Libraries konverted from V9 showed file names for package libraries assigned which were wrong. (von V9 konvertierte Bibliotheken hatten z.T. einen falschen Dateinamen für die Gehäusebibliotheken)
2004-02-12: 11.1.1.51: Reo ignored the correction of ref texts when tightening artificial signal names (Reo vergaß beim Zusammenrücken von künstlichen Signalnamen auch die Ref-Beschriftungen mit zu ändern)
2004-02-11: 11.1.1.51: "Push onto Grid" now not only effects components anymore but also traces and vias highlighted("Aufs Raster schieben" bearbeitet nun nicht mehr nur die Bauteile sondern auch die markierten Bahnen und Dukos)
2004-02-10: 11.1.1.51: AutoPan starts not earlier as the mouse had been hovered once into the main screen (the image faded to the screens edge earlier)(AutoPan geht erst los, wenn die Maus mindestens einmal echt innerhalb des Fensters war (Bild "zappelte" sonst fort))
2004-02-06: 11.1.1.51: List of the last 20 components can be faded.(Liste der 20 zuletzt benutzten Bauteile ist abschaltbar)
2004-02-06: 11.1.1.51: List of the last 20 components couldn't find components which had a blank in the name (Liste der 20 zuletzt benutzten Bauteile konnte Bauteil, die ein Leerzeichen im Namen hatten nicht finden)
2004-02-06: 11.1.1.51: Layer tool shows layer numbers and can be minimized (Ebenen-Werkzeugleiste zeigt EbenenNummern und läßt sich hochklappen)
2004-02-04: 11.1.1.51: Edition of project variables in the hirarchy browser: when intending to close project dialog "Save first?"  was missing (Projekt-Variablen im Hierarchie-Browser ändern, dann Projekt schließen: Nachfrage "Speichern?" fehlte)
2004-02-03: 11.1.1.51: In Hybrid router sometimes texts in copper were missing (Im Hybrid-Router wurde u.U. Text im Kupfer nicht berücksichtigt
2004-02-03: 11.1.1.51: In library browser the package directly is displayed besides the symbol and also its grid width is shown (Im Bibliotheksbrowser wird das Gehäuse gleich mit angezeigt und das Rastermaß)
2004-02-03: 11.1.1.51: "pad free from solder paste" was sometimes intwrpreted false. "Pad-Frei-Von-Lötpaste" wurde u.U. falsch gespeichert
2004-01-30: 11.1.1.51: Update Manager sometimes intended to update files with the same version number (Update-Manager wollte u.U. Files mit gleicher Versionsnummer nochmal herunterladen)
2004-01-28: 11.1.1.51: The Hybrid router sometimes ignored via- and routing- prohibition zones (Im Hybrid-Router wurden u.U. die Via- und Route-Verbotszonen ignoriert)
2004-01-28: 11.1.1.51: In V11 smart the INFO-dialogue showed 1,000 pins instead of 700 (stand im Info-Dialog fälschlicherweise 1000 Pins statt 700)
2004-01-28: 11.1.1.51: The Help-file showed the wrong information that the panelization-function would exceed the pin limitation (In der Hilfe stand fälschlicherweise die Funktion "Nutzen setzen" könne die Pingrenze umgehen)
2004-01-26: 11.1.1.51: Modified the update manager, if PC is offline
2004-01-26: 11.1.1.51: Hybridrouter sometimes ignored the settings for minimum width and minimum spacing
2004-01-20: 11.1.1.35: PCBout.EXE was sometimes not exact in numbering the inner XGerber layers
2003-12-19: 11.1.1.21: Dispatch of V11
2003-12-19: 11.1.1.21: Solderstop and solderpaste to be set individually for each pad/via
2003-12-19: 11.1.1.21: Snap-on-pad extended to bendings and end of tracks
2003-12-19: 11.1.1.21: Generated version "smart"
2003-12-19: 11.1.1.21: Simulation counts signals instead of internal nodes
2003-12-19: 11.1.1.21: Inserted list of the 20 components most recently used
2003-12-19: 11.1.1.21: Dialog "Service approval criticism": contents are saved
2003-12-19: 11.1.1.21: PCB production inquiries included
2003-12-19: 11.1.1.21: Eagle-Export inserted
2003-12-19: 11.1.1.21: Start with check of date und time
2003-12-19: 11.1.1.21: Selection assistant inserted
2003-12-19: 11.1.1.21: Generation of Testing Points inserted
2003-12-19: 11.1.1.21: Panelisation inserted
2003-12-19: 11.1.1.21: New Hybrid router inserted in ultimate V10
2003-11-18: 10.4.1.121: Sometimes several polygones were highligted together just when intending to highlight only one
2003-10-29: 10.4.1.121: Binoculars and Design check: free rests of tracks led to signals "not ready"
2003-10-29: 10.4.1.121: Design check: air wires sometime were alerted to be non orthogonal
2003-10-27: 10.4.1.121: Design check: rectangular pads lacking an aura and placed within a ground plane had sometimes not been alerted
2003-10-22: 10.4.1.96: Library search for "Order numbers" was swapped to "Supplier"
2003-10-22: 10.4.1.96: DXF-Import: extreme coordinates cause warning messages
2003-10-13: 10.4.1.96: Package export: double pad numbers are connected as a bridge internally (like a zero Ohm resistor)
2003-10-13: 10.4.1.96: Wheel mouse scroll to be set in Hierarchy browser: Settings (Registry)
2003-10-13: 10.4.1.96: The settings in the PCB-Pool calculator are stored for the next time
2003-10-10: 10.4.1.96: Inserted buttons [x2] and [:2] in grid dialog
2003-10-06: 10.4.1.93: Under certain circumstances modification date and release date were mixed
2003-10-01: 10.4.1.93: Eagle library import: RECT command as well as rotation R0, R90, R180 and R270 established
2003-09-24: 10.4.1.77: Grid-unit unselected lead to NAN-Values for length entries in dialogs
2003-09-23: 10.4.1.69: Countour-Router: extremely wide tracks showed wide via holes but but narrow via copper
2003-09-20: 10.4.1.69: "Create Slider Track" worked properly only at the first insertion
2003-09-18: 10.4.1.58: Import of Eagle Libs: PAD-command now allows "Long" property
2003-09-15: 10.4.1.57: Occasionally bus names were showed multiple, after a reorganization: $$BUS_1, $$BUS_2 ...
2003-09-15: 10.4.1.57: Dialog "Service, Approval and Criticism" now with a field for an individual SMTP-Server
2003-08-29: 10.4.1.37: Very short aur wires are marked by a little cross
2003-08-25: 10.4.1.30: PostScript had problems in displaying schematic fit to DinA 4 esp. when having more than one Schematic page simultaneously.
2003-08-20: 10.4.1.30: XGerber-Import read only the first line
2003-08-20: 10.4.1.30: XGerber-Import sometimes didn't read in it's own generated Excellon drill hole diameters correctly
2003-07-08: 10.4.1.16: When showing spacing violations at big elements together with small elements the error mark was displayed closer to the smaller element
2003-07-07: 10.4.1.16: Dialog "Grid": 0|0 of relative coordinates can be exactly placed on grid
2003-07-07: 10.4.1.16: XGerber-Import now reads in the XGerber files generated by PCBout itself (incl. some AM = Aperture Macro)
2003-07-03: 10.4.1.16: Gerber Import for Tango also
2003-07-02: 10.4.1.16: "Check" groundplanes, which had been not made out of several rectangles and triangles, generated occasionally wrong warnings
2003-06-30: 10.4.1.16: "Shift Segment" displaced from time to time segments of the same signal upon different copper layer
2003-06-23: 10.3.1.260: "Import XGerber" now is able to read in those elderly "single quadrant" curves
2003-06-23: 10.3.1.260: "Rename Signal" selects the signal which is highlighted in schematic or layout
2003-06-20: 10.3.1.260: Print dialog warnes, when elements still are highlighted in the window. Color-irritations are avoided when printing colored
2003-05-21: 10.3.1.242: Dialogue: "Setting of the tool lifting" in NCP-isolation milling inserted
2003-04-28: 10.3.1.166: New modes of lines: running through, hatched, dotted, hatch-dot, hatch-dot-dot
2003-04-24: 10.3.1.158: Schematic and PCB area enlarged to 1,2m to 1,2m. So DinA 0 possible
2003-04-24: 10.3.1.158: Inserted a switch to dialog "Window/Settings/Options" for placement of two track segments at once
2003-04-22: 10.3.1.154: Bug fixed when mirroring "copper bottom" on a single sided PCB
2003-04-22: 10.3.1.154: Insulation milling: Not connected pins are insulated also
2003-04-02: 10.3.1.154: Any cross of errors now show the number of the error
2003-04-02: 10.3.1.154: Insulation milling caused an error "index of list exceeds maximum"
2003-04-02: 10.3.1.154: Change colors of elements:  dialog for standard colors first
2003-03-27: 10.3.1.126: New EAGLE4.ULP (bugfix...Pad Diameter=auto...Pad Heigt/Width= ZERO)
2003-03-26: 10.3.1.126: Simulation: Symbol-Import in tree view on double click: global models are imported also.
2003-03-20: 10.3.1.117: Bugfix in "Import Model" when destination library/project empty.
2003-03-19: 10.x.x.x: Place tracks:  using [6] or [9] for placing a track it gets nestled to the left or to the right left
2003-03-17: 10.x.x.x: Track segments hit by others somewhere in the middle get split.
2003-03-17: 10.x.x.x: Concatenate a schematic to a "PCB without schematic"
2003-03-17: 10.x.x.x: TextIO:  Protel-Import improved:  buses, spline curves
2003-03-13: 10.x.x.x: Simulation: Graphical user interface completely new.
2003-03-13: 10.x.x.x: Help:  Online Service, approval, criticism:  attached project files now zipped first.
2003-03-11: 10.x.x.x: Under special circumstances the use of buses could cause irritations in counting  signals.
2003-03-05: 10.x.x.x: Netlists can now be exported in CALAY- format.
2003-03-05: 10.x.x.x: The new menu "Register TARGET file extensions..." caused occasionally an error.
2003-03-01: 10.x.x.x: The generation of thermals not only for pads but also for vias.
2003-03-01: 10.x.x.x: on the layers toolbar now find three buttons for vias to be set in the via dialog on the right.
2003-02-25: 10.x.x.x: In OrCad multiwire netlists now pad coordinates for needle tester can be transfered.
2003-02-20: 10.x.x.x: Toggle layers by pressing key [.] when placing the tracks now according to the PadStack chosen.
2003-02-17: 10.x.x.x: Dialog "Change Package":  having highlighted several components prefix, number and value sometimes were egalized.
2003-02-17: 10.x.x.x: New function regarding sliding contacts in menu "Actions" in layout mode.
2003-02-13: 10.x.x.x: New function in Insulation milling: fiducial drills, double sided, insulating, RubOut.
2003-02-10: 10.x.x.x: PCBout: volume of data generated reduced.
2003-01-30: 10.x.x.x: Eagle Import:  when importing only packages, pads numbers were missing.
2003-01-24: 10.x.x.x: PCBout ignored the drill layer under very special circumstances
2003-01-16: 10.x.x.x: Multiple 'inner copper layers' distinguished in package libraries
2002-12-20: 10.x.x.x: SnapOnPad:  when manually routing on copper bottom, SnapOnPads-boxes were fixed to smd-pads on copper top also.
2002-12-16: 10.x.x.x: PCBout:  under certain circumstances groundplanes were cut
2002-12-11: 10.x.x.x: PCBout:  reduction of Ground plane tolerances
2002-12-10: 10.x.x.x: XGerber import:  360° circular interpolation possible (G75, G02, G03).
2002-12-09: 10.x.x.x: PCB Outline Assistant:  The assistant fixed outlines always to layer 23.
2002-12-09: 10.x.x.x: PCBout:  redundant Gerber-aperture-files began sometimes with D0 instead of D10
2002-12-09: 10.x.x.x: Insulation engraving in isel/ProMa NCP-format:  last milling trace in a polygone sometimes too fast.
2002-12-06: 10.x.x.x: Export all components to one library:  some components occasionally appeared multiple.
2002-12-06: 10.x.x.x: Discs can be assigned to already existing signals (e.g. to circular ground planes).
2002-12-06: 10.x.x.x: Colors-dialog: buttons Load and Save inserted to all colors.
2002-11-21: 10.x.x.x: Library scripts from EAGLE (*.scr) are now allowed to have points in the pin name
2002-11-21: 10.x.x.x: Gate-/Symbol Swap now works in a schematic, having several pages.
2002-11-20: 10.x.x.x: The computation of air wires didn' t recognize vias the right way (solved)
2002-11-19: 10.x.x.x: PCBout: rectangles and triangles as G36 Polygones hadn't always been completely closed (solved)
2002-11-06: 10.x.x.x: Replacement of components without connections (e.g. frames) caused  an error (solved)
2002-11-05: 10.x.x.x: PostScript:  Problems with soldering paste solved
2002-10-29: 10.x.x.x: Chip designer:  generating a new project, eg. with the TextIO, the grid in the layout is set to 400nm
2002-10-29: 10.x.x.x: TextIO had problems if properties were displayed which contained CR/LF
2002-10-29: 10.x.x.x: Error message "Loss of data" if new projects had been edited with elderly versions of TARGET 3001!
2002-10-28: 10.x.x.x: Read in of Libraries caused an error, if CR/LF was part of component descriptions
2002-10-27: 10.x.x.x: A variant con be deducted from another
2002-10-26: 10.x.x.x: Air wires can not be highlighted inadvertently
2002-10-26: 10.x.x.x: Number of possible variants of component insertion rises from 32 to 255
2002-10-25: 10.x.x.x: Dialogue "Window/ Settings/Options":  minimum spacing hasn't been saved correctly in the project file
2002-10-23: 10.x.x.x: Texts in Windows-fonts sometimes could not been coloured individually
2002-10-23: 10.x.x.x: XGerber Import acknowledges rectangular polygones as PCB tracks
2002-10-23: 10.x.x.x: Gerber-files import: editing afterwards has been optimized
2002-10-22: 10.x.x.x: Eagle.ulp:  the Ascii-IO Import struggled with elements being drawn freehand in Eagle (R)
2002-10-19: 10.x.x.x: The triangulization struggled sometimes with complex polygones
2002-10-18: 10.x.x.x: Import Eagle library:  "technology -" in *.scr file caused an error
2002-10-18: 10.x.x.x: PCBout: rectangles and triangles as G36 Polygones hadn't always been completely closed (solved)
2002-10-16: 10.x.x.x: Under seldom ocurring circumstances new signal names could be given wrongly
2002-10-11: 10.x.x.x: Black and White print had problems sometimes with individually coloured elements
2002-10-08: 10.x.x.x: Swap Symbols caused an access violation sometimes when activating Reorganization (solved)
2002-10-06: 10.x.x.x: Lib-Browser: Components Read New with button [u]  (below right)
2002-10-04: 10.x.x.x: Pin-names sometimes couldn't be deleted
2002-10-04: 10.x.x.x: Sitgnal tori in schematic hadn't been displayed in signal colour (solved )
2002-10-04: 10.x.x.x: PCBout: rectangles and triangles as G36 Polygones hadn't always been completely closed (solved)
2002-09-27: 10.x.x.x: Thermal-Pads function  inserted in  menu Actions
2002-09-24: 10.x.x.x: Polygones can be generated using key [5] (mit Taste [5] erzeugbar)
2002-09-23: 10.x.x.x: Generation and updating of a wire list in harness layout (Automotive)
2002-09-22: 10.x.x.x: Generation and updating of Harness Layouts (Automotive)
2002-09-20: 10.x.x.x: Loading of "Individual Text Functions" out of V9 files mixed up sometimes.
2002-09-19: 10.x.x.x: Though advertisings had been switched off, the link was activated when clicking on the bachground.
2002-09-19: 10.x.x.x: "Compare Libraries" didn't find libraries sometimes (solved)
2002-09-19: 10.x.x.x: Measurements in [m] established
2002-09-16: 10.x.x.x: save all packages of one project in one library: symbols instead of packages had been saved (solved)
2002-09-11: 10.x.x.x: Isel-Insulaion engraving: extra speed for diving the tool into the into the workpiece can be set
2002-09-10: 10.x.x.x: XGerber-Import reads normal polygones with G36/G37
2002-09-10: 10.x.x.x: Solder paste: only SMD-Pads without drilling are exposed
2002-09-06: 10.x.x.x: Eagle-Script-Import: Grid-command realized more exactly
2002-09-05: 10.x.x.x: DXF-In is able to handle comments out of the first section
2002-08-27: 10.x.x.x: When placing tracks only one segment is placed first
2002-08-27: 10.x.x.x: Chip designer: setting of the track options always is taken to the standard settings
2002-08-22: 10.x.x.x: When dragging and moving the "phantom image of the cursor sometimes didn't show the auro resp. the minimum spacing correctly (solved)
2002-08-22: 10.x.x.x: Sometimes PCBout did not notice additional deletion layers (solved
2002-08-22: 10.x.x.x: Text function "page number" showed <unknown> sometimes (solved)
2002-08-21: 10.x.x.x: When saving the buttons of the layers tool bar colors and patterns are saved also
2002-08-20: 10.x.x.x: In the layers toolbar buttos inserted: all, for show all layers,  "none" for showing none and button "#" for drawing outlines only
2002-08-20: 10.x.x.x: Lib browser:  a change of the package proposals properties remained unsuccessful sometimes (solved)
2002-08-20: 10.x.x.x: Duko options can be reached in the track buttons by a button
2002-08-20: 10.x.x.x: In PCB-view the key [#] toggles to "Draw outlines of packages only (quick drawing)"
2002-08-20: 10.x.x.x: Check project sometimes showed spacing violations which were no
2002-08-14: 10.x.x.x: New Component assistant and and Package assistant released.
2002-08-13: 10.x.x.x: A change of component value at an already generated cell leads always to its deletion
2002-08-13: 10.x.x.x: Cell generator and UnCastor work with leaning rectangles and with text in the right header
2002-08-13: 10.x.x.x: Check Project showed error warnings regards cell overlappings which were no
2002-08-07: 10.x.x.x: 12 Buttons  in "Track Options" can save project settings in the project and in an extra file (*.TRK)
2002-08-07: 10.x.x.x: Exposure of minimum spacing when routing by hand considers the current aura as well
2002-08-06: 10.x.x.x: Exposure of minimum spacing when routing by hand more clearly
2002-08-06: 10.x.x.x: model generator does not insert additional artificial nodes into a model
2002-08-06: 10.x.x.x: Cell generator and UnCastor now copy resp. shift triangles, tori and splines
2002-08-06: 10.x.x.x: Overlapping of packages at times generated a wrong erroe warning "package corrupt"
2002-08-04: 10.x.x.x: Preview images inserted to the new symbol and package assistant.
2002-08-02: 10.x.x.x: "Check Project":  tracks on layer 100 caused an "Out-Of-Range" Error
2002-07-31: 10.x.x.x: ISEL NCP Engraving Insulation Channels: an initial "wrong" error warning deleted
2002-07-24: 10.x.x.x: TARGET 3001! starts correctly under MS Win NT 4.0
2002-07-19: 10.x.x.x: In dialog "Change Pads" the property "layer" had been hooked always to be changed
2002-05-31: 10.x.x.x: PCBout.exe: problem solved regarding tori thinner than smallest aperture set
2002-05-28: 10.x.x.x: Reading library info also recognizes link files *.SYM3001LNK
2002-05-27: 10.x.x.x: Adjustment of the library formats in German version BTL3001 -> SYM3001; GHS3001 -> PCK3001
2002-05-27: 10.x.x.x: Lots of tokens in component- and symbol propertiies egalized
2002-05-06: 10.x.x.x: Further Win XP icons inserted
2002-05-06: 10.x.x.x: Import Component: deactivating warning " A not activated window cannot obtain the focus"
2002-05-06: 10.x.x.x: Calculation- and ordering module for PCB-Pool (R) established
2002-05-06: 10.x.x.x: ISEL .ncp format for isolation milling establshed
2002-05-06: 10.x.x.x: XGerber Import established
2002-05-02: 10.x.x.x: Status line: M1 on coordinates -> absolute, on scale -> draw new, else ->un-highlight
2002-05-02: 10.x.x.x: Highlighting with a special color (e.g. yellow) works in schematic mode also
2002-05-02: 10.x.x.x: Background colors for schematic and PCB-layout independent from the 16 TARGET colors
2002-05-02: 10.x.x.x: New Win XP icons in tool bars
2002-03-23: 10.x.x.x: DXF-In  is able to read text files with only LFs besides those with CRs and CRLFs
2002-03-21: 10.x.x.x: PCB without Schematic: sometimes pins had not been connected correctly after using "undo"
2002-03-02: 10.x.x.x: Overlapping-check ignored whether several lines of the same sub-cell are locatet at the same place
2002-02-13: 10.x.x.x: DXF is able to convert POLYLINE also
2002-02-11: 10.x.x.x: Changing of minimum width and minimum spacing was not effecting directly from time to time
2002-02-07: 10.x.x.x: Direct import of DXF
2002-02-06: 10.x.x.x: Frequency of restoring the status line when using DRC optimized
2002-02-05: 10.x.x.x: Project names as text function (without extension .3001)
2002-01-20: 10.x.x.x: Dispatch of TARGET 3001! V10!
2001-11-28: 9.x.x.x: Page number as text function usable
2001-11-28: 9.x.x.x: Variants also for components with different values and ordering numbers etc.
2001-11-11: 9.x.x.x: Ground plane assistant caused an error message when stated without giving a signal name
2001-11-11: 9.x.x.x: Centering marks had hatched outlines in the screen view
2001-11-08: 9.x.x.x: Possibility to import Gerber from FabFactory
2001-11-03: 9.x.x.x: New opportunity for conversion of Eagle(R) library scripts to TARGET 3001 libraries
2001-10-25: 9.x.x.x: The size of the error marks can be set before the DRC
2001-10-25: 9.x.x.x: The DRC function caused an accessviolation in certain cases
2001-10-24: 9.x.x.x: BEHR job: Output directly for CATIA E3D (IBM)
2001-10-17: 9.x.x.x: The TIFF export in B/W created completely black TIFFs sometimes
2001-10-01: 9.x.x.x: TOYOTA job: Concatenation of plugs and form parts
2001-10-01: 9.x.x.x: TOYOTA job: Construction of looms on the layout side of TARGET
2001-09-07: 9.x.x.x: "Find and Select" was zooming, even if "Zoom in Elements" had been unchecked
2001-09-05: 9.x.x.x: Export PROTEL netlists
2001-09-04: 9.x.x.x: Statusline shows R when creating circles
2001-09-04: 9.x.x.x: Statusline shows dX and dY when creating rectangles
2001-09-04: 9.x.x.x: Statusline shows dX, dY and L when drawing lines
2001-09-04: 9.x.x.x: A relative zero point is indicated as a small gray dashed cross
2001-09-04: 9.x.x.x: The absolute zero point is indicated as a gray dashed cross
2001-09-04: 9.x.x.x: The square meter is indicated as a gray dashed line
2001-09-03: 9.x.x.x: The TIFF-Export in B/W is compressed now and creates very small TIFFs
2001-08-08: 9.x.x.x: Deletion sometimes caused ugly rests remaining on the screen
2001-08-06: 9.x.x.x: Undo also restores the properties of components and signals
2001-08-03: 9.x.x.x: Pick-And-Place and Bill-Of-Material had Problems with components without pads
2001-07-30: 9.x.x.x: DRC and Uncastor report, if an incompatible cell was assigned to a component
2001-07-19: 9.x.x.x: Export sometimes made the wrong error message that some elements were left and not exported
2001-07-15: 9.x.x.x: DRC checks ground planes too
2001-06-21: 9.x.x.x: Signal names that are attached to a signal with [n] are moving smartly even when dragging the signal
2001-06-17: 9.x.x.x: Repeated menu item "Window/Settings" in menu "File"
2001-06-15: 9.x.x.x: Alphanumerical pad names are possible by now
2001-06-15: 9.x.x.x: Printing:  Variant components can be omitted: Possibility to print all drill holes as centering holes only (0,6 mm)
2001-06-14: 9.x.x.x: Chip:  Possibility to enter a subdirectory when generating cells
2001-06-13: 9.x.x.x: In very special cases the DRC did not find a spacing violation between a track and a
2001-06-12: 9.x.x.x: The selections in the "Check Project" dialog are stored in the project now
2001-06-12: 9.x.x.x: Extra colors for every element can overwrite the predefined layer or schematic
2001-06-12: 9.x.x.x: For dual-screen-systems the TARGET dialogs can be set into the right or into the left
2001-06-12: 9.x.x.x: Prefixes of components sometimes could not be renamed
2001-06-12: 9.x.x.x: Compionets, that are not on the current page, were not zoomed in
2001-06-08: 9.x.x.x: TARGET registers the Extensions *.T3, *.T2001, *.T3001, *.T3001A, *.T3001B, *.T3001C and *. BK1 ... *.BK9
2001-06-01: 9.x.x.x: If opening a file without write permission (e.g. on a CD), the file is seen as unsaved
2001-05-30: 9.x.x.x: Sometimes certain airwires were not displayed
2001-05-28: 9.x.x.x: M11 into a block of a blockdiagram, directly leads to the corresponding schematic page
2001-05-23: 9.x.x.x: Introduced command Page: Property="EXECUTE" Value="PAGE: 5" opens schematic page No 5
2001-05-23: 9.x.x.x: Introduced command WinExec19.05.03: Property="EXECUTE" Value="WINEXE C:\TEST.EXE" Executes program "Test"
2001-05-23: 9.x.x.x: Texts can get properties, which may contain commands for mouse click M11
2001-05-21: 9.x.x.x: DRC can select certain layers for the spacing check
2001-05-21: 9.x.x.x: UnCastor registers, if a cell was torn
2001-05-21: 9.x.x.x: DRC in chip designer registers, if a cell was torn
2001-05-08: 9.x.x.x: Mentor netlists can be read
2001-05-08: 9.x.x.x: Netlists can also be read into PCBs
2001-03-27: 9.x.x.x: When editing and exporting a package, the old package properties are remembered
2001-03-27: 9.x.x.x: Lib browser:  After editing a component, the window is closed and the browser is started again
2001-03-26: 9.x.x.x: The export of Packages sometimes caused an access violation
2001-03-21: 9.x.x.x: eBeam output probably had a memory leak
2001-03-20: 9.x.x.x: Tool list can be integrated into the drill file (SM1000 oder CNC 7)
2001-03-16: 9.x.x.x: of component numbers sometimes caused error messages or double component names
2001-03-16: 9.x.x.x: Loops in PCB signals sometimes caused error messages
2001-03-14: 9.x.x.x: Printing:  Variant components can be omitted
2001-03-14: 9.x.x.x: Bill-of-material got an additional header
2001-03-14: 9.x.x.x: Merge circuit to a single cell: Only component values are kept up:
2001-03-08: 9.x.x.x: The library browser shows the pin functions using signs and colors
2001-03-05: 9.x.x.x: First english translation of V9